Jailbreak iOS 6.1.6 Using Redsn0w

Instructions to Jailbreak iOS 6.1.6 Using Redsn0w and P0sixspwn

jailbreak ios 6.1.6
ios 6.1.6 jailbreak

Redsn0w

In case you have an iPhone 3GS or iPod touch 4G client and have moved up to iOS 6.1.6, which was discharged as of late to alter a basic SSL bug then the uplifting news is that it is still conceivable to play out an untethered jailbreak iOS 6.1.6 on your iOS gadget utilizing a blend of Redsn0w and p0sixspwn.

In this article we demonstrate to you proper methodologies to jailbreak iOS 6.1.6 first utilizing Redsn0w, and afterward changing over it into an untethered jailbreak utilizing p0sixspwn Cydia bundle.

It would be ideal if you take note of another rendition of p0sixspwn has been discharged which includes support for iOS 6.1.1, so you can utilize p0sixspwn straightforwardly to play out the untethered jailbreak on your gadget running iOS 6.1.6, rather than utilizing this workaround. You can look at our orderly guide on the most proficient method to jailbreak iOS 6.1.6 utilizing p0sixspwn. On the off chance that you’ve any issue with that technique then you can utilize this workaround.

Here are some critical focuses to note before you continue to Jailbreak iOS 6.1.6

This aide is implied for iPhone 3GS and iPod touch 4G clients as iOS 6.1.6 is perfect with just these gadgets. In case you’re searching for an jailbreak for iOS 7 or higher then checkout our jailbreak page for connections to the most recent instructional exercises.

Cautioning: If you rely on upon Ultrasn0w to open your iPhone, then DO NOT upgrade to iOS 6.1.6.

If it’s not too much trouble take note of that jailbreaking your iOS gadget may void your guarantee and henceforth continue with alert and at your own danger.

Kindly bear in mind to reinforcement your iOS gadget before you continue. You can allude to this post for directions on the most proficient method to reinforcement your iOS gadget utilizing iCloud or this one to reinforcement your iOS gadget utilizing iTunes.

If you don’t mind guarantee you are running most recent adaptation of iTunes.

This strategy utilizes an iOS 6.0 jailbreak with the iOS 6.1.6 filesystem, so it could bring about some obscure issues.

You can take after these regulated guidelines to jailbreak iOS 6.1.6 on your iPhone 3GS and iPod touch 4G .

Jailbreak iOS 6.1.6 step by step guide

Step 1: Download Redsn0w 0.9.15b3 (Redsn0w 0.9.15 beta 3) from this link and recovery the application in an organizer named “Redsn0w” on your desktop.

Download iOS 6.0 firmware  (yes, the trap is to guide Redsn0w toward the iOS 6.0 firmware record and NOT iOS 6.1.6 firmware document) for your iOS gadget from the connections specified beneath:

iPhone Note: Please guarantee you download the right iOS 6.0 firmware  for your iPhone model. Check this connection in the event that you require any assistance in distinguishing which iOS firmware record to download for your iPhone model.

Step 2: Connect your gadget to the PC and double tap the Redsn0w compress document and concentrate the application. Explore to the Redsn0w envelope and dispatch the Redsn0w application.

Windows 7 clients ought to run the exe in Windows XP similarity mode (right-tap on the Redsn0w exe and select Properties, then select the Compatibility tab and select Run this system in similarity mode for Windows XP). Windows XP and Windows 7 clients ought to run Redsn0w as “Manager” (right-tap on the Redsn0w exe and select ‘Keep running as an Administrator’).

Step 3: Click on Extras catch.

Step 4: Then tap on the Select IPSW catch. Explore and select the firmware record download in Step 2. It ought to effectively recognize it and educate you that it will be utilized as a part of whatever is left of the session.

Step 5: Go back to Redsn0w’s principle page and tap on the Jailbreak catch.

Step 6: Redsn0w will now begin setting up the jailbreak information.

Step 7: You will now be provoked to choose the jailbreak choices. Ensure Cydia is chosen and tap on the Next catch to proceed. You can likewise choose Enable battery rate alternative.

Step 8: Then incited to put your iOS gadget into the DFU mode. Turn off your gadget, however keep it connected to the PC.

Step 9: Click on the Next catch. Redsn0w will make you through the vital strides:

(a) Hold the Power catch on your iOS gadget down for 3 seconds:

(b) Now at the same time hold the Home catch and keep the two catches squeezed for 10 seconds:

(c) Discharge the Power key while keeping the Home key squeezed until Redsn0w distinguishes the gadget:

Note: Check this instructional exercise in case you’re experiencing difficulty putting your gadget in DFU mode.

Step 10: Your iOS gadget ought to reboot now. It would be ideal if you recollect to discharge the Home catch.

Step 11: Your iOS gadget will reboot again and Redsn0w will now start transferring the new RAM circle and part.

Step 12: You will be told once the jailbreaking procedure is finished. Click on the Quit catch to leave the application.

Step 13: whatever remains of the procedure will occur on your iOS gadget, sit tight for it to finish. Your iOS gadget will reboot at the end of the day (which could take around 5 minutes). You will now see the Home screen on your iOS gadget, however Cydia would in any case be feeling the loss of, that is on the grounds that despite everything you have to tie boot your iOS gadget utilizing Redsn0w. So take after the strides specified beneath.

Boot fastened:

Step 14: Launch Redsn0w once more.

Step 15: Click on Extras catch.

Step 16: Then tap on the Select IPSW catch. Explore and select the firmware record downloaded in Step 2.

Step 17: Tap on the Just Boot catch.

Step 18: You will now be incited to plug your iOS gadget to the PC and switch it OFF once more. Take after the directions and snap on the Next catch to move to the following screen:

Step 19: You will now need to put your iOS gadget into the DFU mode. Redsn0w will make you through the essential strides:

(a) Hold the Power catch on your iOS gadget down for 3 seconds:

(b) Now at the same time hold the Home catch and keep the two catches squeezed for 10 seconds:

(c) Now discharge the Power catch while keeping the Home catch squeezed until Redsn0w distinguishes the gadget:

Step 20: Redsn0w will perceive the iOS gadget in DFU mode and apply the limerain misuse (recall to discharge the Home catch). Your iOS gadget will reboot and a pineapple logo will show up, demonstrating a fastened boot.

Step 21: Wait for the procedure to finish, once it is finished, you ought to see the Lock screen on your iOS gadget.

Your iPhone or iPod touch has now been effectively jailbroken and you ought to see Cydia on the Home screen. In the event that you don’t discover it on the Home screen, kindly don’t freeze, scan for it utilizing Spotlight. The escape is at present a “fastened” escape,

Change over Tethered Jailbreak to Untethered Jailbreak utilizing P0sixspwn:

Step 22: Launch Cydia. Since you’re propelling Cydia interestingly, you might be incited to do a crucial overhaul. It would be ideal if you simply ahead and do it, and after that relaunch Cydia once more.

Step 23: First tap on the Search tab, and quest for p0sixspwn.

Step 24:  Then tap on p0sixspwn from the indexed lists, tap on Install, trailed by the Confirm catch.

Step 25: Next tap on Return to Cydia when provoked. now you completed the jailbreak iOS 6.1.6 devices successfully

0 thoughts on “Jailbreak iOS 6.1.6 Using Redsn0w”

Leave a Reply

Your email address will not be published. Required fields are marked *